Get A 10% Off When You Sign Up For 2 Years Maintenance Contract!

PRESSURE TEST

A pressure test is carried out to find out where the gas leakage is. It is a test procedure to identify the leakage area. This work is NOT a repair service. It is the fundamental process to define the scope of repair services.

When the air conditioning system does not provide cold air, one of the common problem is air conditioning system depletes its refrigerant gas. Thus, the Pressure Test will be recommended (*Chargeable Service).

PROCEDURE:

LOCATING THE POINT OF LEAKAGE

locating img
  • 1. High pressure is induced into the condenser, fan coil and refrigerant piping to identify where is the refrigerant gas leakage point.
  • 2. Recording the gas pressure :
    • Pressure Day 1 – Date : <___> : <___> psi. [A]
    • Pressure Day 2 – Date : <___> : <___> psi. [B]
    • Pressure [B] – [A] : <___> psi.
  • 3. If Refrigerant leaking found; Locate point of leakage.
  • 4. Once point of leakage has been identified, it will lead to either scenario 1 or 2.

SCENARIO 1

If leaking point was found at piping works is minor and/or the repair location is accessible.

  • Welding works will be perform to seal the leakage or replace short length of the affected area detected . Exclude new piping work if required replacement.

    Warranty : 03 months workmanship warranty on the welding part. *

  • Flushing, Purging & Vacuum entire system to evacuate excess air inside the system.
  • Charge-in of R22/R410 refrigerant up to its standard requirements.
  • Final Step: Testing & Commissioning.
SCENARIO 2

If the refrigerant gas leaking point found at the location that is :

  • Beyond repair
  • The repair location is not accessible
  • Due to wear & tear
  • Very old system
  • Leaking point is at equipment (eg. indoor/outdoor unit)
  • Obsolete model

Work out an economical & effective solution:

  • Replace with New Piping Works
  • Replacement with New Equipment only
  • Change the whole system (Installation)
NOTICE:

If refrigerant gas leak was found, ventilate the area immediately. Toxic gas may be produced if the refrigerant gas leaks into the room and comes into contact with source of fire, such as heater, stove or cooker.

oblication image
CONTACT US FOR INSPECTION

Having problem with your air conditioner? Book an appointment now for a free inspection. No obligation after inspection. *During office hours only & applicable for residential split system only

whatsapp icon